Cisco 6800 Series Hardware Installation

Install the Battery in the Handset
The handset battery is shipped inside the handset, but there’s a plastic tab over the battery contacts. You need
to remove the plastic tab.
Procedure
Step 1 On the back of the handset, turn the latch counterclockwise to unlock the back, lift the clip, and lift the cover
to remove the battery cover.
Step 2 Remove the battery from the handset.
Hardware Installation
16
Hardware Installation
Install the Battery in the Handset

Cisco 6800 Series Specifications

General

Brand	Cisco
Model	6800 Series
Category	IP Phone
Language	English