EasyManuals Logo
Home>Cisco>IP Phone>6800 Series

Cisco 6800 Series Hardware Installation

Cisco 6800 Series
20 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #2 background imageLoading...
Page #2 background image
Estimated simultaneous handset usage: For more information, see Handset Registrations, on page
3.
Size of the space covered.
Range of the base stations. Each base station has a range of up to 984 feet (300 meters) outdoors
and a range of 164 feet (50 meters) indoors.
If required, you can add repeaters to the base station to extend the range of the system:
Table 1: Maximum Number of Repeaters for the Base Stations
RepeatersBase Stations
6110 Single-Cell Base Station
3210 Multi-Cell Base Station
Range of the repeaters. Each repeater has a range of up to 984 feet (300 meters) outdoors and a
range of 164 feet (50 meters) indoors.
The call control system must be set up and operational. Obtain the call control system information,
including server addresses, user ids, and passwords. You may find Worksheets useful when you collect
the information.
Plan the location to install each base station.
Determine if you need to mount the base stations on walls or on the ceiling.
We provide wall plugs and screws to mount the base station on drywall (plasterboard).
Ensure that there’s a LAN connection close to the planned location of each base station. The Ethernet
cable included with the base is 78.5 inches (200 cm) but you can use up to 3937 inches (10,000 cm)
length of straight-through CAT5e cable.
If you don’t use Power over Ethernet (PoE), install the base station near the electrical outlet located
in an area that provides a good coverage for the base station. The length of the power cord with the
adapter is 82 inches (208 cm).
Determine that the base stations are placed so that handsets can communicate. Make sure that the
coverage is optimal for your users.
With the 110 Single-Cell Base Station, you can add repeaters to improve the coverage.
With the 210 Multi-Cell Base Station, you can add additional base stations or repeaters to improve
coverage.
If repeaters are required:
Determine if you need to mount the repeaters on walls or on the ceiling.
We provide wall plugs and screws to mount the repeater on drywall (plasterboard). See the mounting
procedures for further information.
Ensure that there’s an electrical outlet close to the planned location of each repeater. The length of
the power cord with the adapter is 82 inches (208 cm).
Hardware Installation
2
Hardware Installation
Installation Requirements

Other manuals for Cisco 6800 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco 6800 Series and is the answer not in the manual?

Cisco 6800 Series Specifications

General IconGeneral
BrandCisco
Model6800 Series
CategoryIP Phone
LanguageEnglish

Related product manuals