Cisco 730 User Manual

Related Topics
Enable Your Voice Assistant in the Cisco Headsets App, on page 12
Siri Doesn't Respond
Try these steps if you can't activate Siri through your Cisco Headset 730:
• Try to access Siri directly on your mobile device.
• Make sure the voice assistant feature is enabled though the Cisco Headsets app.
• Connect your mobile device to a Wi-Fi or cellular data network.
• Make sure your mobile device is compatible.
Related Topics
Enable Your Voice Assistant in the Cisco Headsets App, on page 12
Update Your Headset Firmware
You can update your headset firmware through the Cisco Headsets mobile app, a Cisco IP Phone, or on Cisco
Jabber (version 12.8 or later). Headset upgrades take about 7–10 minutes to complete. The power indicator
LED alternates red, amber, and green while the headset upgrades.
Procedure
Step 1 To begin your upgrade, do one of these actions:
• Pair your headset to your smart phone, and open the Cisco Headsets mobile app.
• Connect your headset with the USB-C cable to a Cisco IP Phone.
• Connect your headset with the USB-C cable to a computer with Cisco Jabber.
Step 2 Follow the on-screen instructions.
Related Topics
Check Your Headset Firmware, on page 32
Check Your Headset Firmware
Check Your Headset Firmware in the Cisco Headsets App
You can check your current firmware load in the Cisco Headsets app.
The app will send you a prompt when a new firmware version is available.
Note
Cisco Headset 730 User Guide
32
Troubleshooting
Siri Doesn't Respond

Cisco 730 Specifications

General

Control type	Buttons
Headset type	Binaural
Product type	Headset
Product color	Platinum
Wearing style	Head-band
LED indicators	Yes
Operating keys	Answer/end call, Mute, Play/pause, Track \u003C, Track >, Volume +, Volume -
Volume control	Button
Control unit type	On-ear control unit
Country of origin	Malaysia
Recommended usage	Calls/Music
Sound pressure level (max)	118 dB
Number of simultaneously connected devices (max)	3
Wireless range	65 m
Bluetooth version	5.0
Bluetooth profiles	A2DP, AAC, AVRCP, HFP, HSP, SBC
Connectivity technology	Wired & Wireless
Quantity	1
Cables included	Audio (3.5mm), USB Type-A to USB Type-C
Wireless receiver interface	USB Type-A
Microphone type	Built-in
Microphone frequency	80 - 6800 Hz
Number of microphones	4
Microphone direction type	Unidirectional
Impedance	32 Ω
Driver unit	40 mm
Ear coupling	Supraaural
Headphone frequency	20 - 20000 Hz
Noise canceling type	Active
Battery type	Built-in battery
Talk time (ANC on)	20 h
Battery recharge time	2.5 h
Continuous audio playback time (with ANC)	22 h
Quantity per pack	1 pc(s)
Harmonized System (HS) code	85183000
Package depth	240 mm
Package width	215.4 mm
Package height	57.9 mm
Package weight	580 g

Weight and Dimensions

Weight	216 g