To Next Page

To Previous Page

You can also swap between both callers to consult with them individually before you remove

yourself from the call.

Procedure

Step 1

From a call that is not on hold, press Transfer .

Step 2

Enter the other person's phone number.

Step 3

(Optional) Wait until you hear the line ring or until the other person answers the call.

Step 4

Press Transfer again.

Adjust the Volume During a Call:

If the sound in your handset, headset, or speakerphone is too loud or too soft, you can change

the volume while you are listening to the other person. When you change the volume during a

call, the change only affects the speaker you're using at the time. For example, if you adjust the

volume while you're using a headset, the handset volume doesn't change.

Procedure

Press Volume right or left to adjust the volume while you are on a call.

Adjust the Phone Ringer Volume:

If your phone ringer is too loud or too soft when you get an incoming call, you can change the

ringer volume. Changes to the ringer volume do not affect the call volume you hear when you

are on a call.

Procedure

Press Volume right or left to adjust the ringer volume when the phone rings.

Cisco 7841 Manual

Other manuals for Cisco 7841