Speed Dial (Abbreviated Dial)
Speed dial can be configured in several ways:
o Personal Directory entries on the Xutel ExChange Web Portal; just Click to Call an entry
o Setting up Abbreviated Dial list. Access the abbreviated dial by using a Star Code + the two (2) digit number you assigned to represent the number
The Xutel ExChange Abbreviated Dial feature provides a flexible option for enabling up to 99 abbreviated dial numbers that you can configure. These numbers will
not be available via the Xutel ExChange Web Portal.
Setup Abbreviated Dial
1. Dial 75#
2. The system voice prompt will lead you through the steps to setup an abbreviated dial number
a. Press 1 to program an abbreviated dial
b. Press the digits (00-99) you wish to use as the Abbreviated Dial or press * to exit
c. Enter the number you want to assign to this Abbreviated Dial code then press #. REMEMBER to enter any outbound dial digit required
d. Press the # key to save or press the * key to exit without saving
Using an Abbreviated Dial Code
1. Press *3 + the Abbreviated Dial Code for the number you want to reach
2. Press the Dial soft key and pickup the handset to complete the call
Delete an Abbreviated Dial Code
1. Dial 75#
2. The system voice prompt will lead you through the steps to setup an abbreviated dial number.
a. Press 1 to program an abbreviated dial.
b. Press the digits of the Abbreviated Dial you wish to delete followed by the # key.
c. A voice prompt will announce that no number has been entered, press the # key again.
d. Hang up to complete the delete.
Xutel ExChange 7 of 10
Cisco 79054/7912 User Manual-v1.0 02/11/05
Xutel ExChange
To Next Page
Loading...
Need help?
General
