Cisco 7941G - Unified IP Phone VoIP Phone Guide

24 OL-16994-01
Basic Call Handling
You can perform basic call-handling tasks using a range of features and services. Feature availability
can vary; see your system administrator for more information.
Placing a Call—Basic Options
Here are some easy ways to place a call on your Cisco Unified IP Phone.
Tips
• You can dial on-hook, without a dial tone (pre-dial). To pre-dial, enter a number, then go
off-hook by lifting the handset or pressing Dial,
, or .
• When you pre-dial, your phone tries to anticipate the number you are dialing by displaying
matching numbers (if available) from your Placed Calls log. This is called Auto Dial. To call a
number displayed with Auto Dial, press the number, or scroll to it and go off-hook.
If you want to... Then...
For more information,
see...
Place a call using the handset Pick up the handset and enter a number. An Overview of Your
Phone, page 15
Place a call using the
speakerphone
Press and enter a number. Using a Handset,
Headset, and
Speakerphone, page 55
Place a call using a headset Press and enter a number. Or if
is lit, press New Call and enter a number.
Using a Handset,
Headset, and
Speakerphone, page 55
Redial a number Press Redial to dial the last number, or
press the Navigation button (with the
phone idle) to see your Placed Calls.
Using Call Logs, page 57
Place a call when another call
is active (using the same line)
1. Press Hold.
2. Press New Call.
3. Enter a number.
Using Hold and Resume,
page 30
Dial from a call log 1. Choose > Missed Calls,
Received Calls, or Placed Calls.
2. Select the listing or scroll to it and go
off-hook.
Using Call Logs, page 57

Cisco 7941G - Unified IP Phone VoIP Specifications

General

Brand	Cisco
Model	7941G - Unified IP Phone VoIP
Category	IP Phone
Language	English