Cisco 7941G - Unified IP Phone VoIP Phone Guide

Basic Call Handling
Cisco Unified IP Phone 7961G/7961G-GE and 7941G/7941G-GE for Cisco Unified Communications Manager 6.1(3) 29
Tip
If parties on a call hear a beep tone, the call might be monitored or recorded. Ask your system
administrator for more information.
Ending a Call
To end a call, hang up. Here are some more details.
Answer a priority call (SCCP
phones only)
Hang up the current call and press
Answer.
Prioritizing Critical Calls,
page 51
Answer a call on your cellular
phone or other remote
destination
Set up Mobile Connect and answer
your phone.
When you enable Mobile Connect:
• Your desktop and remote
destinations receive calls
simultaneously.
• When you answer the call on your
desktop phone, the remote
destinations stop ringing, are
disconnected, and display a
missed call message.
• When you answer the call on one
remote destination, the other
remote destinations stop ringing,
are disconnected, and a missed
call message is shown on the other
remote destinations.
Managing Business Calls
Using a Single Phone
Number, page 53
If you want to... Then...
Hang up while using the handset Return the handset to its cradle. Or press EndCall.
Hang up while using the headset Press . Or, to keep headset mode active, press EndCall.
Hang up while using the speakerphone Press or EndCall.
Hang up one call but preserve another
call on the same line
Press EndCall. If necessary, remove the call from hold first.
If you want to... Then... For more information, see...

Cisco 7941G - Unified IP Phone VoIP Specifications

General

Brand	Cisco
Model	7941G - Unified IP Phone VoIP
Category	IP Phone
Language	English