Cisco 7965G Guide

Cisco Unified IP Phone 7965G and 7945G Phone Guide for Cisco Unified Communications Manager 7.1(2) 25
Tip
If parties on a call hear a beep tone, the call might be monitored or recorded. Ask your system
administrator for more information.
Ending a Call
To end a call, hang up. Here are some more details.
If you want to... Then...
Hang up while using the handset Return the handset to its cradle. Or press EndCall.
Hang up while using a wired headset Press . Or, to keep headset mode active, press EndCall.
If you are using a wireless headset, refer to the wireless
headset documentation.
Hang up while using the speakerphone Press or EndCall.
Hang up one call, but preserve another
call on the same line
Press EndCall. If necessary, remove the call from hold first.
Answer a priority call
(SCCP phones only)
Hang up the current call and press
Answer.
Prioritizing Critical Calls,
page 49
Answer a call on your
mobile phone or other
remote destination
Set up Mobile Connect and answer your
phone.
When you enable Mobile Connect:
• Your desktop and remote
destinations receive calls
simultaneously.
• When you answer the call on your
desktop phone, the remote
destinations stop ringing, are
disconnected, and display a missed
call message.
• When you answer the call on one
remote destination, the other remote
destinations stop ringing, are
disconnected, and a missed call
message is shown on the other
remote destinations.
Using Cisco Extension
Mobility, page 50
If you want to... Then... For more information, see...

Cisco 7965G Specifications

General

Brand	Cisco
Model	7965G
Category	IP Phone
Language	English