Cisco A9K-SIP-700 Configuration Manual

499
Cisco ASR 9000 Aggregation Services Router Interfaces and Hardware Component Configuration Guide
OL-26061-03
Configuring Serial Interfaces on the
Cisco ASR 9000 Series Router
This module describes the configuration of serial interfaces on the Cisco ASR 9000 Series Router.
Before you configure a serial interface, you must configure the clear channel T3/E3 controller or
channelized T1/E1controller (DS0 channel) that is associated with that interface.
Feature History for Configuring Serial Controller Interfaces
Release Modification
Release 3.3.0 This feature was introduced on the Cisco XR 12000 Series Router.
Support was added on the Cisco XR 12000 Series Router for the following
hardware:
• Cisco XR 12000 SIP-401
• Cisco XR 12000 SIP-501
• Cisco XR 12000 SIP-601
Support was added on the Cisco XR 12000 Series Router for the following
SPAs:
• Cisco 2-Port and 4-Port Channelized T3/DS0 SPA
• Cisco 2-Port and 4-Port T3/E3 Serial SPA
Release 3.4.0 Support for the following features was introduced:
• Subinterfaces with permanent virtual circuits (PVCs)
• Frame Relay encapsulation on serial main interfaces and PVCs on the
following hardware:
– Cisco 8-port Channelized T1/E1 SPA
– Cisco 2-Port and 4-Port Channelized T3/DS0 SPA
– Cisco 2-Port and 4-Port T3/E3 Serial SPA
– Cisco 1-Port Channelized OC-3 SPA
– Cisco 1-Port Channelized OC-12 SPA
– Cisco 1-Port Channelized OC-48 SPA
– Cisco 1-Port Channelized OC-12/STM-4 ISE Line Card

Cisco A9K-SIP-700 Specifications

General

Brand	Cisco
Model	A9K-SIP-700
Category	Network Router
Language	English