◦
17.60 inches (44.70 cm) for the Cisco ASR 9910 Router.
•
To mount the router in a 4-post rack, the usable aperture (the width between the inner edges of the two
mounting flanges) must be at least 17.75 inches (45.09 cm) for the Cisco ASR 9922 Router or Cisco
ASR 9912 Router.
•
Height of the Cisco ASR 9010 Router is 36.75 inches (93.35 cm). Most racks accommodate two ASR
9010 routers.
•
Height of the Cisco ASR 9006 Router is 17.50 inches (44.45 cm). Most racks accommodate four ASR
9006 routers.
•
Height of the Cisco ASR 9904 Router is 10.38 inches (26.36 cm). Most racks accommodate seven ASR
9904 routers.
•
Height of the Cisco ASR 9910 Router is 36.70 inches (93.28 cm). Most racks accommodate two ASR
9910 routers.
•
Height of the Cisco ASR 9922 Router is 77.00 inches (195.58 cm). Most racks accommodate one ASR
9922 router.
•
Height of the Cisco ASR 9912 Router is 52.50 inches (133.35 cm). Most racks accommodate one ASR
9912 router.
•
When fully populated with cards, the router can weigh up to 1038 pounds (470.28 kg). To maintain
equipment rack stability and to ensure your safety, the rack is provided with stabilizing devices. Make
sure you install the stabilizers before installing the router.
•
If you use a telco-style rack, the weight of the chassis is cantilevered off of the two rack posts. Make
sure that:
◦
Weight of the router does not make the frame unstable.
◦
Frame is bolted to the floor and is secured to the building structure using either wall brackets or
overhead brackets.
•
When mounting the router in a telco-style rack or 4-post rack, be sure to use all of the screws provided
to secure the chassis to the rack posts.
•
Install the cable-management brackets included with the router to keep cables organized. Be sure to:
◦
Use appropriate strain-relief methods to protect cables and equipment connections.
◦
Make sure that cables from other equipment installed in the rack do not restrict access to the card
cages.
•
To avoid noise interference in network interface cables, do not route them directly across or along power
cables.
Cisco ASR 9010 Router Chassis Footprint and Dimensions—Top-Down View figure below shows the top-down
view chassis dimensions of the Cisco ASR 9010 Router.
Cisco ASR 9006 Router Chassis Footprint and Dimensions—Top-Down View figure below shows the top-down
view chassis dimensions of the Cisco ASR 9006 Router.
Cisco ASR 9904 Router Chassis Footprint and Dimensions—Top-Down View figure below shows the top-down
view chassis dimensions of the Cisco ASR 9904 Router.
Cisco ASR 9000 Series Aggregation Services Router Hardware Installation Guide
5
Preparing for Installation
Site Requirement Guidelines
To Next Page
Loading...
Need help?
General
