Cisco AS5400XM - Universal Gateway Voice High-Density Easy Order Bundle User Manual

5-10
Cisco AS5350XM and Cisco AS5400XM Universal Gateways Card Installation Guide
78-17406-01
Chapter 5 Universal Port and Dial-Only Feature Cards
System Processing Engine Firmware
Step 6 Check the card LEDs to verify that the card is working properly. For information about feature card
LEDs, see Chapter 7, “Troubleshooting.”
System Processing Engine Firmware
System processing engine (SPE) firmware is automatically downloaded to a universal port or dial-only
feature card from the Cisco IOS image when you boot the system for the first time, or when you insert
a universal port or dial-only feature card while the system is operating. When you insert feature cards
while the system is operating, the Cisco IOS image recognizes the cards and downloads the required
firmware to the cards.
For more information on universal port and dial-only feature card firmware and upgrade options, see the
Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide.
Getting Help
For information about technical support, onsite service, and exchange and repair services, see the
“Obtaining Technical Assistance” section on page xvi.
Where to Go Next
The remaining chapters of this guide include information about installing and troubleshooting feature
cards and about building cables.
• Chapter 6, “Voice Feature Card”
• Chapter 7, “Troubleshooting”
• Appendix A, “Cabling Specifications”

Cisco AS5400XM - Universal Gateway Voice High-Density Easy Order Bundle Specifications

General

Brand	Cisco
Model	AS5400XM - Universal Gateway Voice High-Density Easy Order Bundle
Category	Gateway
Language	English