Cisco ASR 1000 Series Installation And Configuration Guide

xi
Cisco ASR 1000 Series Aggregation Services Routers Hardware Installation and Initial Configuration Guide
OL-13208-03
Preface
This preface discusses the objectives, audience, and organization of the Cisco ASR 1000 Series
Aggregation Services Routers Hardware Installation and Initial Configuration Guide. The following
sections are in this preface:
• Document Revision History, page xi
• Document Objectives, page xii
• Audience, page xii
• Document Organization, page xii
• Safety Warnings and Cautions, page xiii
• Related Documentation, page xviii
• Obtaining Documentation and Submitting a Service Request, page xix
Document Revision History
The Document Revision History table below records technical changes to this document.
Document
Version
Date Change Summary
OL-13208-03 November 2008 Improved the two-minute window allotted time to
replace a power supply. You now have up to a maximum
of five minutes to replace the power supply.
OL-13208-02 October 2008 Added Cisco ASR1000-ESP20 and Cisco
ASR1000-ESP10-N support. Updated eUSB device
graphics and replacement information.
OL-13208-01 May 2008 This is the first version of this document for the Cisco
ASR 1000 Series Routers (Cisco ASR1006 Router, Cisco
ASR1004 Router, Cisco ASR1002 Router).

Cisco ASR 1000 Series Specifications

General

Series	ASR 1000
Category	Network Router
Operating System	Cisco IOS XE
Memory	Up to 64 GB
Interfaces	10 Gigabit Ethernet
Power Supply	AC or DC options
Dimensions	Varies by model
Encryption	IPsec, SSL
Storage	Varies by model
Operating Temperature	32°F to 104°F (0°C to 40°C)
Humidity	5% to 95% non-condensing
MTBF	Varies by model