Cisco ASR 1000 Series Installation And Configuration Guide

3-22
Cisco ASR 1000 Series Aggregation Services Routers Hardware Installation and Initial Configuration Guide
OL-13208-03
Chapter 3 Preparing Your Site for Installation
Checking the Shipping Container Contents
Note Most Cisco documentation is online or on the Cisco Documentation DVD. Documentation that ships
with your Cisco ASR1000 Series router includes the Regulatory Compliance and Safety Information for
the Cisco
Aggregation Services Router 1000 Series document, and the Cisco Aggregation Services
Router 1000 Series Documentation Roadmap that contains documentation titles and the URLs to them
online. See also the “Related Documentation” section on page xviii.
Table 3-10 Cisco ASR 1000 Series Router Shipping Container Contents List
Component Description Received
Chassis Cisco ASR 1000 Series Router configured with dual AC or dual DC
power supplies and a shared port adapter blank panel if a shared port
adapter has not been ordered.
Accessories Kit Front and rear chassis rack-mount brackets that you will attach to the
chassis with the respective screws
Three sets of screws, one set for:
• Front rack-mount brackets (use the black screws)
• Rear rack-mount brackets (use the package with the 5 screws)
• Cable-management brackets (use the 4 screw package)
Two cable-management brackets with ‘U’ feature design devices
attached; a different size for each chassis.
ESD, Wrist Strap (disposable) 1 disposable wrist strap
Documentation Regulatory Compliance and Safety Information for Cisco Aggregation
Services 1000 Series Chassis document
Optional Equipment Power cord if an AC power supply was shipped. There are none for the
DC power supply units.

Cisco ASR 1000 Series Specifications

General

Brand	Cisco
Model	ASR 1000 Series
Category	Network Router
Language	English