Cisco ASR 1002-X Overview And Installation

SUMMARY STEPS
1. Connect one end of the RJ-45 cable to the serial RJ-45 port (CON) on the front panel (see the following
image).
2. Run the cable up and through the cable management bracket and connect the other end of the RJ-45 cable
to the RJ-45 adapter (see Figure 33: Cisco ASR 1002-X Router Console Port Connection on the Route
Processor, on page 41).
3. Connect the adapter to your video terminal to complete the cable connection.
4. Power on your video terminal.
5. Configure your video terminal to match the following default console port settings:
6. Continue with the installation by referring to the procedure described in the Connecting External Cables
to the Cisco ASR 1002-X Router, on page 42.
DETAILED STEPS
Step 1 Connect one end of the RJ-45 cable to the serial RJ-45 port (CON) on the front panel (see the following image).
Figure 33: Cisco ASR 1002-X Router Console Port Connection on the Route Processor
AUX port connection2CON port connection1
Step 2 Run the cable up and through the cable management bracket and connect the other end of the RJ-45 cable to the RJ-45
adapter (see Figure 33: Cisco ASR 1002-X Router Console Port Connection on the Route Processor, on page 41).
Step 3 Connect the adapter to your video terminal to complete the cable connection.
Step 4 Power on your video terminal.
Step 5 Configure your video terminal to match the following default console port settings:
• 9600 baud
• 8 data bits
• No parity generation or checking
• 1 stop bit
• No flow control
Cisco ASR 1002-X Router Overview and Installation
41
Cisco ASR 1002-X Router Overview and Installation
Connecting a Terminal to the Console Port

Cisco ASR 1002-X Specifications

General

Brand	Cisco
Model	ASR 1002-X
Category	Network Router
Language	English