Cisco ASR 920 series Configuration

RFCs
TitleRFCs
--No new or modified RFCs are supported by this
feature, and support for existing RFCs has not been
modified by this feature.
Technical Assistance
LinkDescription
http://www.cisco.com/cisco/web/support/index.html
The Cisco Support and Documentation website
provides online resources to download documentation,
software, and tools. Use these resources to install and
configure the software and to troubleshoot and resolve
technical issues with Cisco products and technologies.
Access to most tools on the Cisco Support and
Documentation website requires a Cisco.com user ID
and password.
Feature Information for MPLS Point-to-Multipoint Traffic
Engineering
The following table provides release information about the feature or features described in this module. This
table lists only the software release that introduced support for a given feature in a given software release
train. Unless noted otherwise, subsequent releases of that software release train also support that feature.
Use Cisco Feature Navigator to find information about platform support and Cisco software image support.
To access Cisco Feature Navigator, go to www.cisco.com/go/cfn. An account on Cisco.com is not required.
Table 2: Feature Information for MPLS Point-to-Multipoint Traffic Engineering
Feature InformationReleasesFeature Name
This feature was introduced on the
Cisco ASR 920 Series Aggregation
Services Router
(ASR-920-12CZ-A,
ASR-920-12CZ-D,
ASR-920-4SZ-A,
ASR-920-4SZ-D,
ASR-920-10SZ-PD,
ASR-920-24SZ-IM,
ASR-920-24SZ-M,
ASR-920-24TZ-M) .
Cisco IOS XE Release 3.15.0SMPLS Point-to-Multipoint Traffic
Engineering
MPLS Traffic Engineering Path Calculation and Setup Configuration Guide, Cisco IOS XE Release 3S (Cisco ASR
920 Series)
39
MPLS Point-to-Multipoint Traffic Engineering
Feature Information for MPLS Point-to-Multipoint Traffic Engineering

Cisco ASR 920 series Specifications

General

Brand	Cisco
Model	ASR 920 series
Category	Network Router
Language	English