Cisco ASR 920 series Installing Guide

Step 2
Secure the cable guides with the four M6x12mm screws supplied with the cable kit. The recommended maximum torque
is 3N-m.
Figure 8: Installing the Cable Guides (As Per the Standard Kit)
Wall Mounting the Cisco ASR 920 Series Router
To install the Cisco ASR 920 Series Router on a wall, follow the instructions in these procedures:
Attaching the Brackets to the Router for Wall-Mounting
While wall mounting the Cisco ASR 920 Series Router, always ensure that the power supplies are at the
top position.
Note
Cisco ASR 920 Series Aggregation Services Router Hardware Installation Guide
11
Installing the Cisco ASR 920 Series Router
Wall Mounting the Cisco ASR 920 Series Router

Cisco ASR 920 series Specifications

General

Brand	Cisco
Model	ASR 920 series
Category	Network Router
Language	English