Cisco C1000-8P-2G-L User Manual

APPENDIX C
Configuring the Switch
This appendix contains these topics:
• Configuring the Switch Using the Configuration Setup Wizard, on page 57
• Configuring the Switch Using the CLI, on page 59
Configuring the Switch Using the Configuration Setup Wizard
Quick Setup: Accessing the Configuration Setup Wizard
When you first set up the switch, use the Configuration Setup wizard to enter the initial IP information. This
enables the switch to connect to local routers and the Internet. You can then access the switch through the IP
address for further configuration.
If your device supports Bluetooth, it loads with the initial setup tasks preconfigured. Connect your PC to the
device using Bluetooth. In your Web browser, enter the IP address 172.16.0.1. Enter the following default
credentials: username: cisco, password: cisco and press Enter.
Note
Cisco Catalyst 1000 Series 8-Port and 16-Port Switch Hardware Installation Guide
57

Cisco C1000-8P-2G-L Specifications

General

Brand	Cisco
Model	C1000-8P-2G-L
Category	Switch
Language	English