EasyManuals Logo
Home>Cisco>Network Router>C1101-4P

Cisco C1101-4P Installation And Connection

Cisco C1101-4P
26 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Install and Connect the Router
This chapter describes how to install and connect Cisco 1000 Series Integrated Services Router (ISR) to LAN
and WAN networks.
Read the installation instructions before using, installing or connecting the system to the power source.
Statement 1004
Warning
Installing the Cisco 1000 Series Integrated Services Routers involve these tasks:
Unpack the Router, on page 1
Set up Router on Desktop, Rack, or Wall, on page 1
Connect Power Cable, on page 19
Connect the Router to a Console, on page 21
Connect WAN and LAN Interfaces, on page 25
Configure the Router at Startup, on page 26
Unpack the Router
Unpack the router only when you are ready to install it. If the installation site is not ready, to prevent accidental
damage, keep the chassis in its shipping container until you are ready to install.
The router, accessory kit, publications, and any optional equipment you order may be shipped in more than
one container. When you unpack the containers, check the packing list to ensure that you have received all
listed items.
Set up Router on Desktop, Rack, or Wall
After unpacking, based on your requirements, you can set up a Cisco 1100 Series Integrated Services Routers
(ISRs) on a desktop, a rack, or the wall.
Install and Connect the Router
1

Other manuals for Cisco C1101-4P

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco C1101-4P and is the answer not in the manual?

Cisco C1101-4P Specifications

General IconGeneral
DSL WANNo
Ethernet WANYes
Wi-Fi band-
WLAN data transfer rate (max)- Mbit/s
Cabling technology10/100/1000Base-T(X)
Ethernet LAN data rates1000 Mbit/s
Ethernet LAN interface typeGigabit Ethernet
Ethernet LAN (RJ-45) ports4
Security algorithmsAES, WPA2
Product typeTabletop router
Product colorGray
Country of originChina
Output voltage12 V
AC input voltage100 - 240 V
Power source typeAC
AC input frequency50 - 60 Hz
Power consumption (typical)30 W
Internal memory4000 MB
Operating altitude0 - 3000 m
Non-operating altitude0 - 4570 m
Storage temperature (T-T)0 - 65 °C
Operating temperature (T-T)0 - 40 °C
Storage relative humidity (H-H)5 - 95 %
Operating relative humidity (H-H)10 - 85 %
Quantity per pack1 pc(s)
Harmonized System (HS) code85176990
Package depth333.502 mm
Package width254 mm
Package height177.8 mm
Package weight3083.9 g

Related product manuals