Fan Modules Overview 49
Installation Guidelines 50
Installing a Fan Module 50
Finding the Fan Module Serial Number 51
Configuring the Switch 53
CHAPTER 6
Configuring the Switch Using the Web User Interface 53
Setting up the Switch 53
Connecting to the Switch 53
Creating User Accounts 57
Choosing Setup Options 57
Configuring Basic Device Settings 57
Configuring Your Device Based on a Site Profile 59
Configuring Switch Wide Settings 64
Configuring VLAN Settings 64
Configure STP Settings 65
Configuring DHCP, NTP, DNS and SNMP Settings 65
Configuring Port Settings 66
Configuring VTY Lines 67
Configuring the Switch Using the CLI 68
Accessing the CLI Through the Console Port 68
Connecting the RJ-45 Console Port 68
Connecting the USB Console Port 69
Installing the Cisco Microsoft Windows USB Device Driver 70
Installing the Cisco Microsoft Windows 7 USB Driver 70
Uninstalling the Cisco Microsoft Windows USB Driver 70
Uninstalling the Cisco Microsoft Windows 7 USB Driver 70
Technical Specifications 73
APPENDIX A
Environmental and Physical Specifications 73
Specifications for the Power Supplies and Fans 77
Switch LEDs 79
APPENDIX B
LEDs 79
Cisco Catalyst 9200 Series Switches Hardware Installation Guide
v
Contents
To Next Page
Loading...
Need help?
General