Cisco C9200L-48P-4X User Manual

Data Stack Cabling Configurations 17
Data Stack Bandwidth and Partitioning Examples 18
Power-On Sequence for Switch Stacks 20
Installing the Switch 21
Rack-Mounting 21
Attaching the Rack-Mount Brackets 22
Mounting the Switch a Rack 24
Installing the Switch on a Table or Shelf 24
After Switch Installation 25
Connecting to the StackWise Ports 25
Connecting Devices to the Ethernet Ports 27
10/100/1000 Port Connections 27
Auto-MDIX Connections 27
Auto-MDIX Connections 27
PoE and POE+ Port Connections 28
Installing a Network Module 31
CHAPTER 3
Installing a Network Module in the Switch 31
Safety Warnings 31
Equipment That You Need 31
Installing a Network Module 32
Removing a Network Module 34
Finding the Network Module Serial Number 34
Installing and Removing SFP Modules 35
Installing SFP/SFP+ Modules 35
Removing SFP/SFP+ Modules 37
Installing a Power Supply Unit 39
CHAPTER 4
Power Supply Modules Overview 39
Finding the Power Supply Module Serial Number 41
Installation Guidelines 42
Installing or Replacing an AC Power Supply Module 43
Installing a Fan Module 47
CHAPTER 5
Cisco Catalyst 9200 Series Switches Hardware Installation Guide
iv
Contents

Cisco C9200L-48P-4X Specifications

General

Uplink interfaces	4x 10G SFP+
Default power supply	715W AC
PoE power budget	740W
Switching capacity	176 Gbps
DRAM	4 GB
Form Factor	1 RU
Jumbo Frame	9198 bytes
Dimensions	44.5 x 4.4 x 40.2 cm
Operating Temperature	0°C to 45°C
Operating Humidity	5 to 90% relative humidity
Total 10/100/1000 or Multigigabit copper ports	48
Weight	7.26 kg