EasyManuals Logo
Home>Cisco>IP Phone>CALNET 3

Cisco CALNET 3 User Manual

Cisco CALNET 3
170 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #142 background imageLoading...
Page #142 background image
While using Bluetooth headset, there can be potential interference issues. Therefore Cisco recommends that
you reduce the proximity of other 802.11b/g devices, Bluetooth devices, microwave ovens, and large metal
objects.
For a Bluetooth wireless headset to work, it does not need to be within direct line-of-sight of the phone, but
some barriers, such as walls or doors, and interference from other electronic devices, can affect the connection.
Add a Bluetooth Accessory
For Cisco IP Phone 8845, 8851, 8861 and 8865 only. Cisco IP Phone 8851NR does not support Bluetooth.
Before you add a Bluetooth accessory, it must be discoverable by the phone. Look for a flashing LED on a
Bluetooth accessory as an indication that it is discoverable. For more information, see the documentation from
the Bluetooth accessory manufacturer.
Procedure
Step 1
Press Applications .
Step 2
Select Bluetooth.
Step 3
Select Add Bluetooth Accessory.
The phone searches for discoverable accessories that are supported. When an accessory is found, it is added
to the list in the Adding Bluetooth Accessory screen.
Step 4
Select the accessory and press Connect.
The phone automatically attempts to connect the accessory using a Bluetooth device PIN of 0000.
Step 5
If your accessory requires a different PIN and the Adding PIN screen appears, enter the PIN for your accessory.
When the connection completes, a checkmark appears next to the connected accessory.
When Bluetooth is turned on, the Bluetooth active icon appears on the phone screen header.
Connect a Bluetooth Accessory
For Cisco IP Phone 8845, 8851, 8861, and 8865 only. Cisco IP Phone 8851NR does not support Bluetooth.
Before You Begin
Before you can connect a Bluetooth accessory, it must be already added as an accessory to the phone.
Procedure
Step 1
Press Applications .
Step 2
Select a Bluetooth accessory and press Connect.
When the connection completes, a checkmark appears next to the connected accessory.
Cisco IP Phone 8811, 8841, 8845, 8851, 8851NR, 8861, and 8865 User Guide for Cisco Unified Communications
Manager 11.0
130
Accessories
Add a Bluetooth Accessory
REVIEW DRAFT - CISCO CONFIDENTIAL

Table of Contents

Other manuals for Cisco CALNET 3

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco CALNET 3 and is the answer not in the manual?

Cisco CALNET 3 Specifications

General IconGeneral
BrandCisco
ModelCALNET 3
CategoryIP Phone
LanguageEnglish

Related product manuals