Cisco Catalyst 1000 Series User Manual

CHAPTER 2
Switch Installation
This chapter contains these topics:
• Safety Warnings, on page 11
• Box Contents, on page 15
• Tools and Equipment, on page 16
• Installation Guidelines, on page 17
• Verifying Switch Operation, on page 17
• Installing the Switch, on page 18
• Installing the Power Cord Retainer (Optional), on page 25
• Installing SFP Modules, on page 27
• Connecting to SFP or SFP+ Modules, on page 30
• 10/100/1000 PoE+ Port Connections, on page 32
• 10/100/1000 Ethernet Port Connections, on page 33
Safety Warnings
To reduce the risk of electric shock, disconnect all power cords before servicing.
Warning
The switch is to be connected only to PoE networks without routing to the outside plant.
Warning
This section includes the warning statements relating to basic installation. Read this section before you start
the installation procedure.
Before working on equipment that is connected to power lines, remove jewelry (including rings, necklaces,
and watches). Metal objects will heat up when connected to power and ground and can cause serious burns
or weld the metal object to the terminals. Statement 43
Warning
Cisco Catalyst 1000 Series 24-Port and 48-Port Switch Hardware Installation Guide
11

Cisco Catalyst 1000 Series Specifications

General

Brand	Cisco
Model	Catalyst 1000 Series
Category	Switch
Language	English