Cisco Catalyst 1900 Series Quick Start Guide

4
3 Assign IP Information to the Switch
Assign an IP address to the switch so that
you can use the web console and the switch
can communicate with local routers and the
Internet. Contact your system administrator
for the switch IP information, and record it
here.
Switch IP address:
Subnet mask:
Default gateway:
1 After POST completes, the
Management Console Logon Screen
appears on your terminal, PC, or
laptop. Enter the [I] IP Configuration
option from this logon screen.
Catalyst 1900 Management Console
Copyright (c) Cisco Systems, Inc.
1993-1998
All rights reserved.
Standard Edition Software
Ethernet address:
00-E0-1E-7E-B4-40
PCA Number: 73-2239-01
PCA Serial Number: SAD01200001
Model Number: WS-C1924-A
System Serial Number: FAA01200001
---------------------------------------
User Interface Menu
[M] Menus
[I] IP Configuration
Enter Selection:
The IP Configuration Menu appears.
2 Enter the [I] IP address option from the
IP Configuration Menu.
Catalyst 1900 - IP Configuration
Ethernet Address: 00-E0-1E-7E-B4-40
-------------Settings------------------
[I] IP address
[S] Subnet mask
[G] Default gateway
[M] IP address of DNS server 1
[N] IP address of DNS server 2
[D] Domain name
[R] Use Routing Information Protocol
-------------Actions-------------------
[P] Ping
[X] Exit to previous menu
Enter Selection:
3 Enter the IP address of the switch at the
prompt:
Enter administrative IP address in
dotted quad format (nnn.nnn.nnn.nnn):
Current setting ===> 0.0.0.0
New setting ===>
The IP address appears on the
IP Configuration Menu.
4 If you want, you can also enter the
subnet mask and default gateway from
the IP Configuration Menu. If the
switch is connected to a network that
has a DHCP server, the server assigns
this information automatically.
5 Enter the [X] Exit option until you exit
from the menu console.

Cisco Catalyst 1900 Series Specifications

General

Brand	Cisco
Model	Catalyst 1900 Series
Category	Switch
Language	English