Cisco Catalyst 9400 Series 48-Port Gigabit Ethernet POE/POE+ Module (C9400-LC-48P)
48-port, 10/100/1000 BASE-T Gigabit Ethernet switching module supporting up to 30W per port
on each of its 48 ports .
• Hardware ready for IEEE 1588/802.1as— A Precision Time Protocol (PTP) used for time
synchronization across the network for video and audio applications.
• Supports Energy Efficient Ethernet (EEE)
• You can speicfy maximum power consumption on every port.
• Supports POE cable loss management.
• Supports EnergyWise 3.0
• Has a built-in, front-facing, passive RFID tag that uses Ultra High Frequency (UHF) RFID
technology and requires an RFID reader with compatible software. It provides
auto-identification capabilities for asset management and tracking. The RFID tags are
compatible with the Generation 2 GS1 EPC Global Standard and are ISO 18000-6C compliant.
They operate in the 860- to 960-MHz UHF band. For more information, see Radio Frequency
Identification (RFID) on Cisco Catalyst 9000 Family Switches.
Description
48 Gbps, full duplex non-blocking trafficPer Slot Bandwidth
• Catalyst 9404R Switch—48 / 96
• Catalyst 9407R Switch—48 / 240
• Catalyst 9410R Switch—48 / 384
Minimum / Maximum Port
Density
6
Can be installed in any non-supervisor module slot. There are no other restrictions.Support and Restrictions
6
The number of ports available on a single switch
15
To Next Page
Loading...
Need help?
General