CHAPTER 2
Advanced-Mode DOCSIS Set-Top Gateway 1.2
for the Cisco CMTS Routers
The Advanced-Mode DOCSIS Set-Top Gateway (A-DSG) Issue 1.2 introduces support for the latest DOCSIS
Set-Top specification from CableLabs
™
, to include the following enhancements:
•
DOCSIS Set-top Gateway (DSG) Interface Specification
•
A-DSG 1.2 introduces support for the DOCS-DSG-IF MIB.
Cisco A-DSG 1.2 is certified by CableLabs
™
, and is a powerful tool in support of latest industry innovations.
A-DSG 1.2 offers substantial support for enhanced DOCSIS implementation in the broadband cable
environment. The set-top box (STB) dynamically learns the overall environment from the Cisco CMTS
router, to include MAC address, traffic management rules, and classifiers.
Finding Feature Information
Your software release may not support all the features documented in this module. For the latest feature
information and caveats, see the release notes for your platform and software release. To find information
about the features documented in this module, and to see a list of the releases in which each feature is
supported, see the Feature Information Table at the end of this document.
Use Cisco Feature Navigator to find information about platform support and Cisco software image support.
To access Cisco Feature Navigator, go to http://tools.cisco.com/ITDIT/CFN/. An account on http://
www.cisco.com/ is not required.
Contents
•
Hardware Compatibility Matrix for Cisco cBR Series Routers, page 10
•
Prerequisites for Advanced-Mode DSG Issue 1.2, page 10
•
Restrictions for Advanced-Mode DSG Issue 1.2, page 10
•
Information About Advanced-Mode DSG Issue 1.2, page 11
•
How to Configure Advanced-Mode DSG Issue 1.2, page 14
•
How to Monitor and Debug the Advanced-mode DOCSIS Set-Top Gateway Feature, page 29
•
Configuration Examples for Advanced-Mode DSG, page 31
Cisco cBR Series Converged Broadband Routers Application—Voice and Video Configuration Guide
9
To Next Page
Loading...
Need help?
General
