Cisco cBR Series Configuration Guide

To display information for a given DSG tunnel, use the show cable dsg tunnel tunnel-id command, specifying
the tunnel for which to display information.
show cable dsg tunnel tunnel-id [cfr | clients | interfaces | statistics | verbose]
• cfr—Shows DSG tunnel classifiers.
• clients—Shows DSG tunnel clients.
• interfaces—Shows DSG tunnel interfaces.
• statistics—Shows DSG tunnel statistics.
• verbose—Shows DSG tunnel detail information.
show cable dsg tg
To display the configured parameters for all DSG tunnel groups, use show cable dsg tg command.
The Chan state column in the show cable dsg tg command output indicates that a channel belonging to
a tunnel group is either enabled or diabled. It is possible that a tunnel group is enabled but a particular
channel in that tunnel group is disabled.
Note
To display the configured parameters for the specified tunnel group, use show cable dsg tg tg-id channel
channel-id command.
To display detailed information for the specified tunnel group, use show cable dsg tg tg-id channel channel-id
verbose command.
show running-config interface
To display a tunnel group attached to a subinterface, use the show running-config interface command in
privileged EXEC mode, as shown in the example below:
Router# show running-config interface bundle 11.2
!
interface Bundle11.2
ip address 4.4.2.1 255.255.255.0
no ip unreachables
ip pim sparse-mode
ip igmp static-group 230.1.1.30
no cable ip-multicast-echo
cable dsg tg 61
end
The IGMP static group IP address created automatically at the time of DSG configuration is not displayed
in the show running-config interface command output.
Note
show cable dsg static-group bundle
To verify all DSG static groups configured under a bundle interface, use the show cable dsg static-group
bundle command in privileged EXEC mode.
Cisco cBR Series Converged Broadband Routers Application—Voice and Video Configuration Guide
30
Advanced-Mode DOCSIS Set-Top Gateway 1.2 for the Cisco CMTS Routers
Displaying Global Configurations for Advanced-Mode DSG 1.2

Cisco cBR Series Specifications

General

Brand	Cisco
Model	cBR Series
Category	Network Router
Language	English