AP Model Numbers and Regulatory Domains
DetailsProduct IDAP Type
Wi-Fi 6E AP, tri-band, 802.11ax with intern
directional antennas
CW9166D1-A
CW9166D1-B
CW9166D1-E
CW9166D1-F
CW9166D1-Q
CW9166D1-R
CW9166D1-Z
CW9166D1-ROW
CW9166D1-MR
Access Point for indoor environments, with
internal antennas
Verify whether the AP model you have is approved for use in your country. To verify approval and to identify
the regulatory domain that corresponds to a particular country, see https://www.cisco.com/c/dam/assets/prod/
wireless/wireless-compliance-tool/index.html. Not all regulatory domains have been approved. As and when
they are approved, this compliance list is updated.
The x in the model numbers represents the regulatory domain.
Note
Antennas and Radios
The following sections provide detailed information about the AP's antennas and radios.
Internal Antennas
The Cisco Catalyst Wireless 9166D1 AP (CW9166D1-x) has the following list of internal antennas:
• Four integrated directional dual-band antennas to dedicated 2.4-GHz radio and a 5-GHz radio
• Four integrated directional dual-band antennas to dedicated 5-GHz radio or a 6-GHz radio
• One integrated directional single-band antenna to 2.4-GHz IoT radio
• Two integrated directional tri-band antennas to dedicated 2.4 GHz, 5-GHz, and 6-GHz Aux radios
Cisco Catalyst Wireless 9166D1 Series Wi-Fi 6E Access Point Hardware Installation Guide
4
About the Access Point
AP Model Numbers and Regulatory Domains
To Next Page
Loading...
Need help?
General
