Cisco CW9166D1-ROW User Manual

DescriptionMounting Brackets
Articulating wall/pole mount kit. This kit should be used along
with AIR-AP-BRACKET-2
CW-MNT-ART2-00
For low-profile non-pivoting installationsAIR-AP-BRACKET-1=
Flush ceiling grid clipAIR-AP-T-RAIL-F=
Recessed ceiling grid clipAIR-AP-T-RAIL-R=
T-RAIL channel adapterAIR-CHNL-ADAPTER=
• Power injectors when Power over Ethernet (PoE) is not available
DescriptionPower Supply
Mid-span power injector AIR-PWRINJ7= when (PoE) is not
available
Power specifications: 50W, 56VDC
For more information, see the power injector data sheet.
AIR-PWRINJ7=
A 802.3at power injector when PoE is not available
Power Specifications: 30W, 55VDC
For more information, see the power injector data sheet.
AIR-PWRINJ6=
Meraki 802.3bt PoE injector
Power Specifications: 60W, 55VDC
For more information, see the power injector data sheet.
MA-INJ-6-x
Cisco Catalyst Wireless 9166D1 Wi-Fi 6E Access Point Hardware Installation Guide
16
Unpacking Your Access Point
Cisco Orderable Accessories

Cisco CW9166D1-ROW Specifications

General

Brand	Cisco
Model	CW9166D1-ROW
Category	Wireless Access Point
Language	English