Cisco EX60 Administrator's Guide

Cisco TelePresence System EX Series Administrator Guide
D14726.14 EX Series Administrator Guide TC7.1, APRIL 2014. www.cisco.com — Copyright © 2010–2014 Cisco Systems, Inc. All rights reserved.
51
Remote support user
In cases where you need to diagnose problems on the
TelePresence device you can create a remote support user.
The remote support user will be granted read access to the
system and will have access to a limited set of commands
that can aid troubleshooting.
You will need assistance from Cisco Technical Assistance
Center (TAC) to acquire the password for the remote
support user.
The remote support user should only be enabled
for troubleshooting reasons when instructed by
Cisco TAC.
Navigate to: Maintenance > System Recovery: Remote Support User tab
Create remote support user
1. Open a case with Cisco TAC.
2. Click Create user.
3. Copy the text in the Token field and
send to Cisco TAC.
4. Cisco TAC will generate a password
that is valid for seven days, or until the
remote support user is deleted.
Delete remote support user
Click Delete user.
Contents
Introduction
Web interface
System settings
Setting passwords
Appendices
Web interface

Cisco EX60 Specifications

General

Brand	Cisco
Model	EX60
Category	Conference System
Language	English