Table 1: Firepower 1120, 1140, and 1150 Features
115011401120Feature
• Certified for the 1120, 1140, and 1150 on ASA 9.16.x:
• Common Criteria Certification for the Network Device Collaborative
Protection Profile (NDcPPv2.2E)
• Firewall Collaborative Protection Profile Module (FW_MOD_v1.4e)
• Virtual Private Network Gateway Protection Profile Module
(VPNGW_MOD_v1.1)
• Certified for the 1120 and 1140 on FTD 6.4.x and FX-OS 2.6.x:
• Common Criteria Certification for the Network Device Collaborative
Protection Profile (NDcPPv2.2E)
• IPS Extended Package (IPSEP v2.11)
• Firewall Collaborative Protection Profile Module (MOD_FW_v1.4e)
• Virtual Private Network Gateway Protection Profile Module
(MOD_VPNGW_v1.1)
• Federal Information Processing Standards (FIPS) 140-2 certified for the
1120 and 1140 on FTD 6.4.x and FX-OS 2.6.x.
• Department of Defense Information Network Approved Product List (DoDIN
APL) certified on the 1120 and 1140.
• US Government Compliance for IPv6 (USGv6) on FTD 7.0.x— Certification
Approval under the R1 Profile for the Product Classification “NPP” certified
on the 1120, 1140, and 1150.
See the "Security Certifications Compliance" topic in the "Appliance Platform
Settings" chapter in the Firepower Management Center Configuration Guide,
Version 6.7 for the instructions on how to enable security certifications
compliance.
Security standards
certifications
1 RUForm factor
Rack mount
4-post Electronic Industries Association (EIA)-310-D rack
Mounting
I/O side to non-I/O side
Rear panel to front panel (cold aisle to hot aisle)
Airflow
One 16-core Intel CPU
One 12-core Intel CPUProcessor
32-GB DDR4 DRAM16-GB DDR4 DRAMMemory
One Gigabit Ethernet RJ-45 10/100/1000 BaseT
Restricted to network management access only
Management port
Cisco Firepower 1100 Series Hardware Installation Guide
2
Overview
Features