EasyManuals Logo
Home>Cisco>Network Hardware>Firepower 1120

Cisco Firepower 1120 User Manual

Cisco Firepower 1120
42 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #9 background imageLoading...
Page #9 background image
For Windows operating systems, you must install a Cisco Windows USB Console Driver on any
PC connected to the console port before using the USB console port. See Connect to the Console
Port with Microsoft Windows, on page 29 for information on installing the driver.
Note
External Flash Storage
The chassis contains a standard USB Type A port that you can use to attach an external device. The USB
port can provide output power of 5 volts, up to a maximum of 1 A (5 USB power units).
External USB drive (optional)—You can use the external USB Type A port to attach a data-storage
device. The external USB drive identifier is disk1. When the chassis is powered on, a connected
USB drive is mounted as disk1 and is available for you to use. Additionally, the file-system
commands that are available to disk0 are also available to disk1, including copy, format, delete,
mkdir, pwd, cd, and so on.
FAT-32 File System—The Firepower 1100 only supports FAT-32-formatted file systems for the
external USB drive. If you insert an external USB drive that is not in FAT-32 format, the system
mounting process fails, and you receive an error message. You can enter the command format
disk1: to format the partition to FAT-32 and mount the partition to disk1 again; however, data might
be lost.
Package Contents
The following figure shows the package contents for the Firepower 1100. Note that the contents are subject
to change, and your exact contents might contain additional or fewer items.
There are three sets of four screws that you can use to secure the chassis to your rack. Chose the screws
that fit your rack.
Note
Cisco Firepower 1100 Series Hardware Installation Guide
5
Overview
Package Contents

Other manuals for Cisco Firepower 1120

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco Firepower 1120 and is the answer not in the manual?

Cisco Firepower 1120 Specifications

General IconGeneral
Processor cores12
Processor familyIntel
Built-in processorYes
Firewall throughput1500 Mbit/s
Wi-FiNo
IPSec VPN throughput1 Gbit/s
Maximum firewall connections200000
Maximum firewall connections per second75000
Supported network protocolsSMTP
Console portRJ-45
Connectivity technologyWired
Number of console ports1
SFP module slots quantity4
Ethernet LAN (RJ-45) ports8
SSD capacity200 GB
Storage media typeSSD
Form factor1U
Input current2 A
AC input voltage100-240 V
AC input frequency50 - 60 Hz
Power consumption (max)100 W
Operating altitude0 - 3000 m
Storage temperature (T-T)-25 - 70 °C
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)10 - 90 %
Country of originMexico
Quantity per pack1 pc(s)
Harmonized System (HS) code85176990
Package depth1409.7 mm
Package width990.6 mm
Package height457.2 mm
Package weight5782.31 g
Weight and Dimensions IconWeight and Dimensions
Depth436.9 mm
Width268.7 mm
Height43.7 mm

Related product manuals