Cisco GLC-FE100FX User Manual

1
Without Digital Optical Monitoring (DOM)
2
With Digital Optical Monitoring (DOM)
3
NEBS 3 ESD
For more information about support for Gigabit Ethernet installations on links of multimode fibers, refer to
Cisco
Support for Gigabit Ethernet Deployments with Multimode Fiber Links up to 2 km.
Cisco CWDM Transceiver Modules
A
Cisco Coarse Wavelength Divison Multiplexing (CWDM) SFP is a hot-swappable input/output device
that plugs into an SFP port or slot of a Cisco switch or router, and links the port with the fiber-optic
network. The Cisco CWDM SFPs are multirate parts that support both Gigabit Ethernet and Fibre Channel
(1 Gigabit and 2 Gigabit).
CWDM SFP Module [Yellow-coded CWDM-SFP-1550 shown]
CWDM SFPs come in eight wavelengths that range from 1470 nm to 1610nm. Color markings on the
devices identify the wavelength to which the Gigabit Ethernet channel is mapped. This table lists the SFPs
with their wavelength and color codes.
Cisco
1000BASE-
BX10-D &
1000BASE-
BX10-U SFP
GLC-BX-
D
2
GLC-
BX-U
2
standard single-mode fiber. A
1000BASE-BX10-D device is
always connected to a
1000BASE-BX10-U device with
a single strand of standard
single-mode fiber with an
operating transmission range up
to 10 km.
Cisco
1000BASE-T
SFP
GLC-T
SFP-GE-
T
3
1000BASE-T SFP Transceiver
Module for Category 5 copper
wire.
S. No. Description
1 Color arrow on label
2 Receive optical bore
3 Transmit optical bore
4 Color coded bale clasp
5 Optical bore dust plug
Part
Number
Description Color Code
CWDM-
SFP-
Cisco CWDM 1470-nm SFP;
Gigabit Ethernet and 1 and 2
Gray

Cisco GLC-FE100FX Specifications

General

Brand	Cisco
Model	GLC-FE100FX
Category	Transceiver
Language	English