Cisco IE 3000 User Manual

Contents
iv
Cisco IE 3000 Switch Software Configuration Guide
OL-13018-01
Understanding CLI Error Messages 2-5
Using Configuration Logging 2-5
Using Command History 2-6
Changing the Command History Buffer Size 2-6
Recalling Commands 2-6
Disabling the Command History Feature 2-7
Using Editing Features 2-7
Enabling and Disabling Editing Features 2-7
Editing Commands through Keystrokes 2-7
Editing Command Lines that Wrap 2-9
Searching and Filtering Output of show and more Commands 2-10
Accessing the CLI 2-10
Accessing the CLI through a Console Connection or through Telnet 2-10
CHAPTER 3 Configuring Cisco IE 3000 Switch Alarms 3-1
Understanding IE 3000 Switch Alarms 3-1
Global Status Monitoring Alarms 3-2
FCS Error Hysteresis Threshold 3-2
Port Status Monitoring Alarms 3-2
Triggering Alarm Options 3-3
Configuring IE 3000 Switch Alarms 3-4
Default IE 3000 Switch Alarm Configuration 3-4
Configuring the Power Supply Alarm 3-5
Setting the Power Mode 3-5
Setting the Power Supply Alarm Options 3-5
Configuring the Switch Temperature Alarms 3-6
Setting the Primary Temperature Threshold for the Switch 3-6
Setting a Secondary Temperature Threshold for the Switch 3-7
Associating the Temperature Alarms to a Relay 3-7
Configuring the FCS Bit Error Rate Alarm 3-8
Setting the FCS Error Threshold 3-8
Setting the FCS Error Hysteresis Threshold 3-9
Configuring Alarm Profiles 3-9
Creating or Modifying an Alarm Profile 3-10
Attaching an Alarm Profile to a Specific Port 3-11
Enabling SNMP Traps 3-11
Displaying IE 3000 Switch Alarms Status 3-12

Cisco IE 3000 Specifications

General

Brand	Cisco
Model	IE 3000
Category	Switch
Language	English