Cisco IE-5000-16S12P User Manual

2
Product Overview
Cable Side
Cable Side
Figure 1 Cisco IE-5000 Cable-Side View
LEDs
For detailed information about LEDs see LEDs, page 6.
Display Mode Button
For detailed functionality see Display Mode Button, page 8.
GPS Antenna Port
GNSS Module RF Input Requirements
The GPS/GNSS input requires a GPS/GNSS receive antenna with built-in Low-Noise Amplifier (LNA) for optimal performance. The LNA
amplifies the received satellite signals to:
 Compensate for cable loss
 Increase the signal amplitude to a suitable range for the receiver front-end
1 LEDs 8 Power-input terminal
2 Display mode button 9 Alarm port
3 GPS antenna port 10 Console port
4 Digital Timecode I/O (IRIG)
(Not currently supported by software)
11 Four 1000 SFP/10G SFP+ Ports (Uplinks)
5 Analog Timecode I/O (IRIG)
(Not currently supported by software)
12(top) Twelve 10/100/1000 PoE/PoE+ Ports (Downlinks)
6 USB (mini-Type B) console port 12 (bottom) Twelve 100/1000 SFP Ports (Downlinks)
7 Time of Day (TOD) Port
(Not currently supported by software)
13 Flash memory card slot
1 4 5
12 11 10 813
2 6 73
9
349768

Cisco IE-5000-16S12P Specifications

General

Brand	Cisco
Model	IE-5000-16S12P
Category	Switch
Language	English