6
Product Overview
Cable Side
LEDs
You can use the switch system and port LEDs to monitor switch activity and performance.
Switch Panel LEDs
Figure 4 Switch LEDs (Cable Side)
Port LEDs
Each Ethernet port has a port LED. These port LEDs, display information about the individual ports. The port mode determines the type of
information shown by the port LEDs. Table 2 on page 7 lists the mode LEDs and their associated port modes and meanings.
To select or change a mode, press the Mode button until the desired mode is highlighted. The Mode LED will turn ON solid green when a
mode is selected and turn OFF when timeout (5 seconds) or a different mode is selected. When you change port modes, the meanings of the
port LED colors also change. Table 3 on page 7 explains how to interpret the port LED colors in different port modes.
1 Ethernet ports 11 PSU1 and 2 (power supply 1 and 2)
2 10G Ethernet ports 12 OUT (alarm output)
3 10G Ethernet ports 13 Alarms 2 and 4
4 Display mode switch 14 Alarms 1 and 3
5 Express Setup button 15 Timecode status (not currently supported by software)
6 PoE 16 GPS status
7 Synchronous Ethernet status 17 SD (SD flash memory card)
8 Redundancy status 18 USB (mini-USB console)
9 Port duplex status 19 SYS (system)
10 Port speed status 20 SD card slot cover
1 2 4
349769
13141516171819
3
5
20
6789101112
To Next Page
Loading...
Need help?
General