2-6
User Guide for Cisco LCD Professional Series Displays
OL-17986-01
Chapter 2 The Basics
Getting to Know Your Cisco LCD Professional Series Display
About the Remote Control
When a TV or other electronic device is near your Cisco LCD Professional Series display, the remote
control might perform poorly or malfunction due to interference with the frequency.
Figure 2-4 Button Map
1 Power on . 11 Not available. 22 Not available.
2 Power off . 12 Not available. 23 Return — Returns to the previous
menu.
3 Number buttons — Press to change
the channel.
13 Still — Press once to freeze the
screen. Press it again to unfreeze.
Audio continues without
interruption.
24 Up/Down/Left/Right
buttons
— Moves from one menu
item to another horizontally or
vertically, or adjusts values in the
selected menu.
4 Not available. 14 Not available. 25 Exit — Exits from the active
menu.
5 Audio volume +/–. 15 S.Mode — Shows on screen which
preconfigured stereo mode is active.
Press again to cycle through
modes.
1
26 Surround Sound — SRS TS XT.
To Next Page
Loading...
Need help?
General
