4-22
User Guide for Cisco LCD Professional Series Displays
OL-17986-01
Chapter 4 Adjusting Display Settings
Using the Setup Menu
Before You Begin
• This feature is available only with DVI.
• This procedure assumes that your remote control and the front panel controls on your LCD display
are not locked.
Procedure
Step 1 From the main menu, choose Setup > Reset > Color Reset.
Step 2 To choose OK or Cancel, push the Left or Right button.
Step 3 To save your selections and implement them, push Enter.
Related Topics
• Locking Front Panel Controls and the Remote Control, page 2-7
• About Terminals on the Back of Your Display, page 2-4
Adjusting Inverter Lamp Power Consumption Settings from the Lamp Control
Menu
You can adjust the inverter lamp to reduce energy consumption.
Before You Begin
• This feature is not available when Dynamic Contrast is turned on.
• This procedure assumes that your remote control and the front panel controls on your LCD display
are not locked.
Procedure
Step 1 From the main menu, choose Setup > Lamp Control.
Step 2 To adjust the setting, push the Left or Right button.
Step 3 To save your selections and implement them, push Enter.
Related Topics
• Locking Front Panel Controls and the Remote Control, page 2-7
• Turning Automatic Contrast Optimation On or Off from the Dynamic Contrast Menu, page 4-6
Working in the S/N Menu
Not supported.
To Previous Page
Loading...
Need help?
General
