Cisco Linksys WUSB54G User Manual

11
Chapter 4: Setting up and Connecting the USB Network Adapter
Setting Up the Adapter
Wireless-G USB Network Adapter
3. Press the Cisco logo or Secure Easy Setup button on the wireless router or access point. When it turns white
and begins to flash, click the Next button on the Setup Wizard screen. The logo or button will stop flashing on
the wireless router or access point when the Adapter has been successfully added to the network. Repeat
this procedure for any additional Secure Easy Setup device.
4. When Secure Easy Setup is complete, you may save your configuration to a text file by clicking the Save
button, or print the configuration by clicking the Print button. Click Connect to Network to connect to your
network.
Congratulations! Setup is complete.
To check the link information, search for available wireless networks, or make additional configuration
changes, refer to Chapter 5: Using the Wireless Network Monitor.
NOTE: You can only add one Secure Easy Setup device at a time.
Figure 4-10: Secure Easy Setup Complete

Cisco Linksys WUSB54G Specifications

General

Brand	Cisco
Model	Linksys WUSB54G
Category	Adapter
Language	English