Cisco Linksys WUSB54G User Manual

33
Chapter 5: Using the Wireless Network Monitor
Creating a New Profile
Wireless-G USB Network Adapter
6. Press the Cisco logo or Secure Easy Setup button on the wireless router or access point. When it turns white
and begins to flash, click the Next button on the Setup Wizard screen. The logo or button will stop flashing on
the wireless router or access point when the Adapter has been successfully added to the network. Repeat
this procedure for any additional Secure Easy Setup device.
7. Secure Easy Setup is now complete and a configuration profile will has been created automatically. You may
save your configuration profile to a text file by clicking the Save button, or print the configuration by clicking
the Print button. Click Connect to Network to connect to your network.
Congratulations! Secure Easy Setup is complete.
Figure 5-21: Secure Easy Setup Complete
NOTE: You can only add one SecureEasySetup device at a time.

Cisco Linksys WUSB54G Specifications

General

Brand	Cisco
Model	Linksys WUSB54G
Category	Adapter
Language	English