Cisco MDS 9132T User Manual

Connecting the Console Port
This section describes how to connect the RS-232 console port to a PC. The console port allows you to perform
the following functions:
•
Configure the switch from the CLI.
•
Monitor network statistics and errors.
•
Configure SNMP agent parameters.
•
Download software updates to the switch or distribute software images residing in flash memory to
attached devices.
•
Initial switch configuration
•
Password recovery
Connecting the Console Port to a PC
You can connect the console port to a PC serial port for local administrative access to the Cisco MDS 9132T
switch.
The PC must support VT100 terminal emulation. The terminal emulation software—frequently a PC
application such as HyperTerminal Plus—makes communication between the Cisco MDS 9132T switch
and your PC possible during setup and configuration.
Note
To connect the console port to a PC, follow these steps:
Step 1
Configure the baud rate and character format of the PC terminal emulation program to match the following management
port default characteristics:
•
9600 baud
•
8 data bits
•
1 stop bit
•
No parity
Step 2
Attach the adapter required for your PC to its communication port. It must present an RJ-45 socket towards the switch.
•
For a DB-9 serial port attach the supplied RJ-45 to DB-9 female adapter.
•
For a DB-25 serial port attach the supplied RJ-45 to DB-25 female adapter.
•
For a USB port attach a customer supplied USB-to-serial dongle.
Cisco MDS 9132T Fibre Channel Switch Hardware Installation Guide
44
Connecting the Cisco MDS 9132T Switch
Connecting the Console Port

Cisco MDS 9132T Specifications

General

Brand	Cisco
Model	MDS 9132T
Category	Switch
Language	English