Cisco Nexus 3064 User Manual

Number-8 Phillips flat-head screws (4 each bracket)3Rear-mounting position1
Front-mounting position2
c) Secure the bracket to the chassis using four Number-8 Phillips flat-head screws and tighten each screw to 12 in-lb
(1.36 N·m) of torque.
d) Repeat previous step for the other front rack-mount bracket on the other side of the switch and be sure to position
that bracket the same distance from the front of the switch.
Cisco Nexus 3000 Series Hardware Installation Guide
41
Installing the Chassis
Installing a 1 (RU) Chassis in a Two-Post Rack

Cisco Nexus 3064 Specifications

General

Product Model	Nexus 3064
Category	Switch
Switching Capacity	1.28 Tbps
Form Factor	1 RU
MAC Address Table Size	32, 000 entries
Jumbo Frame Support	Yes
Jumbo Frame Size	9216 bytes
Operating System	Cisco NX-OS
Memory	4 GB
VLANs	4096
AC Input Voltage	100 to 240 VAC
AC Input Frequency	50 to 60 Hz
Operating Temperature	32°F to 104°F (0°C to 40°C)
Storage Temperature	-40°F to 158°F (-40°C to 70°C)
Ports	48 x 10GE SFP+
Airflow	Port-side exhaust or port-side intake
Humidity	5% to 95% (non-condensing)
Power Supply	Dual hot-swappable power supplies