Cisco Nexus 3064 User Manual

DC Power Cable Specifications
Cord Set DescriptionPower CordPower Supply
No power cord included with
switch
NO-POWER-CORDAll except Argentina, Brazil, and
Japan
For N2200-PDC-350W-B or N2200-PDC-400W DC power supplies
The terminal block used (2-position) accepts wire sizes 22AWG-14AWG.
For the maximum input current of approximately 15A, a 18AWG wire meets minimum requirements. 16AWG
adds some margin, and is recommended.
There is no earth ground connection on this input terminal block, thus the earth grounding is provided by the
system being grounded.
Note
HVDC Power Cable Specifications
Cord Set DescriptionPower Cord Part NumberType
6.6-foot (2.0 m) cable with
Saf-D-Grid and three terminal
connectors
CAB-HVDC-3T-2MHVDC
Cisco Nexus 3000 Series Hardware Installation Guide
70
System Specifications
DC Power Cable Specifications

Cisco Nexus 3064 Specifications

General

Brand	Cisco
Model	Nexus 3064
Category	Switch
Language	English