EasyManuals Logo
Home>Cisco>Firewall>RV110W

Cisco RV110W User Manual

Cisco RV110W
12 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #4 background imageLoading...
Page #4 background image
4 Cisco RV110W Wireless-N VPN Firewall
If you are experiencing extreme problems with the Cisco RV110W and
have tried all other troubleshooting measures, press and hold in the
RESET button for more than 10 seconds. This reboots the unit and
restores the factory defaults. Changes you have made to the Cisco
RV110W settings are lost.
LAN Ports (1-4)—These ports provide a LAN connection to network
devices, such as PCs, print servers, or switches.
WAN (Internet) Port—The WAN port is connected to your Internet device,
such as a cable or DSL modem.
POWER Button—Press this button to turn the firewall on and off.
12VDC PortThe 12VDC port is where you connect the provided 12 volt
DC power adapter.
Connecting the Equipment
NOTE You must connect one PC with an Ethernet cable for the purpose of
the initial configuration. After you complete the initial configuration,
administrative tasks can be performed using a wireless connection.
STEP 1 Power off all equipment, including the cable or DSL modem, the PC
you will use to connect to the Cisco RV110W, and the Cisco
RV110W.
STEP 2 You should already have an Ethernet cable connecting your PC to
your current cable or DSL modem. Unplug one end of the cable
from your PC and plug it into the port marked “WAN” on the unit.
3

Other manuals for Cisco RV110W

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco RV110W and is the answer not in the manual?

Cisco RV110W Specifications

General IconGeneral
Ethernet LANYes
Cabling technology10/100Base-T(X)
Networking standardsIEEE 802.11b, IEEE 802.11e, IEEE 802.11g, IEEE 802.11n, IEEE 802.1p, IEEE 802.3, IEEE 802.3u
VPN tunnels quantity10
Ethernet LAN data rates10, 100 Mbit/s
Ethernet LAN interface typeFast Ethernet
Wi-Fi standards802.11b, 802.11g, Wi-Fi 4 (802.11n)
Channels quantity13 channels
Top Wi-Fi standardWi-Fi 4 (802.11n)
Ethernet LAN (RJ-45) ports4
Input voltage12 V
Rack mountingNo
Number of users32 user(s)
Weight (imperial)0.61 lbs
Dimensions (WxDxH)150 x 150 x 30 mm
Operating temperature (T-T)32 - 104 °F
Compliance industry standardsIEEE 802.3, IEEE 802.3u
Supported data transfer rates10/100Mbps
Dimensions (W x D x H) (imperial)5.91 x 5.91 x 1.18 \
WLAN data transfer rates supported11, 54 Mbit/s
Supported network protocolsPPPoE, DHCP, PPTP, L2TP, IGMP, RSTP
Antennas quantity2
Antenna gain level (max)1.8 dBi
Firewall securityVPN
Security algorithmsWEP, WPA, WPA2, WPS
MAC address filtering-
Product colorBlack
CertificationFCC, CE, IC, cUL, Wi-Fi
Storage temperature (T-T)-20 - 70 °C
Storage relative humidity (H-H)5 - 90 %
Operating relative humidity (H-H)10 - 85 %
Weight and Dimensions IconWeight and Dimensions
Width150 mm
Height30 mm
Weight300 g

Related product manuals