EasyManuals Logo
Home>Cisco>Network Router>RV260W

Cisco RV260W User Manual

Cisco RV260W
12 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #6 background imageLoading...
Page #6 background image
6 Cisco RV260W Router Quick Start Guide
Back Panel
WIFI — Push the button to enable or disable the WIFI.
Console Port — The router console port is designed for a serial cable
connection to a terminal or a computer that is running a terminal emulation
program.
USB — Type A USB port that supports flash drives and 3G/4G/LTE USB
dongles. Caution: Use only the power supply provided with the device;
using another power supply may cause the USB dongle to fail.
SFP Port — A small factor-form pluggable (SFP) is a hot-swappable input/
output device that plugs into the SFP port, linking the port with the
network.
WAN — Connecting the router to a wide area network device such as a
cable or DSL modem.
LAN — (1-8) RJ-45 device connections to link local area network devices,
such as PCs, print servers, or switches to the router.
POWER — Toggles power to the device on or off.
12VDC (2.5A) — Power port that connects the device to the provided
12VDC, 2.5 amp power adapter.
Side Panel
Kensington Lock Slot - Lock slot on the right side to secure the device
physically, using the Kensington lock-down equipment.
Connecting the Equipment
Connect a configuration terminal (PC) to the device by using a LAN port.
The terminal must be in the same wired subnetwork as the device to
perform the initial configuration. As part of the initial configuration, the
device can be configured to allow remote management.
To connect a computer to the device:
STEP 1 Power off all equipment, including the cable or DSL modem, the
computer, and this device.
STEP 2 Use an Ethernet cable to connect your cable or DSL modem to the
WAN port on this device.
STEP 3 Connect another Ethernet cable from one of the LAN (Ethernet)
ports to the Ethernet port on the computer.
3

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco RV260W and is the answer not in the manual?

Cisco RV260W Specifications

General IconGeneral
Ethernet WANYes
SIM card slot-
WAN connection typeRJ-45
Throughput0.8 Gbit/s
Cabling technology10/100/1000Base-T(X)
Networking standardsIEEE 802.1x
VPN tunnels quantity20
Ethernet LAN data rates10, 100, 1000 Mbit/s
Ethernet LAN interface typeGigabit Ethernet
USB portNo
Combo SFP ports quantity1
Ethernet LAN (RJ-45) ports8
Mobile network generationNot supported
Security algorithmsIPSec
Routing protocolsRIP-1, RIP-2, RIPng
Antenna typeExternal
Antennas quantity3
Product typeTabletop router
Product colorBlack, Grey
Country of originChina
Storage temperature (T-T)-20 - 70 °C
Operating temperature (T-T)0 - 40 °C
Storage relative humidity (H-H)5 - 90 %
Operating relative humidity (H-H)10 - 85 %
Top Wi-Fi standardWi-Fi 5 (802.11ac)
WLAN data transfer rate (max)- Mbit/s
Power source typeDC
Quantity per pack1 pc(s)
Harmonized System (HS) code85176990
Package depth378.968 mm
Package width272.034 mm
Package height130.048 mm
Package weight1451.5 g
Weight and Dimensions IconWeight and Dimensions
Depth279.4 mm
Width170 mm
Height38.5 mm
Weight1359.93 g

Related product manuals