Cisco RV260W User Manual

Cisco RV260W Router Quick Start Guide 7
STEP 4 Power on the WAN device and wait until the connection is active.
STEP 5 Connect the power adapter to the 12VDC port of this device.
CAUTION Use only the power adapter that is supplied with the device.
Using a different power adapter could damage the device or
cause the USB dongles to fail.
The power switch is on by default. The power light on the front
panel is solid green when the power adapter is connected
properly and the device is finished booting.
STEP 6 Plug the other end of the adapter into an electrical outlet. Use the
plug (supplied) specific to your country.
STEP 7 Continue with the instructions in the Using the Setup Wizard to
configure the device.
Getting Started with the Configuration
To configure the router, you can either use Ethernet or wireless.
Please follow these steps to access the Wizard and then the
web-based configuration utility from your computer by Ethernet:
STEP 1 Ethernet: Power on the PC that you connected to the LAN port. Your
PC becomes a DHCP client of the device and receives an IP
address in the 192.168.1.xxx range.
Wireless: Search the wireless SSID "CiscoSB-Setup", and connect
to this SSID with the passphrase "cisco123".
STEP 2 Locate the IP address of the router. The router IP address is
192.168.1.1 by default. As well,
a. The router can be accessed and managed by Cisco network
tools and services including the Cisco FindIT Network
Discovery Utility that enables you to automatically discover all
supported Cisco devices in the same local network segment
as your computer. You can get a snapshot view of each device
or launch the product configuration utility to view and configure
the settings. For more information, see www.cisco.com/go/
findit.
b. The router is Bonjour-enabled and automatically broadcast
their services and listen for services being advertised by other
Bonjour-enabled devices. If you have a Bonjour-enabled
browser, such as Microsoft Internet Explorer with a Bonjour
4

Cisco RV260W Specifications

General

Ethernet WAN	Yes
SIM card slot	-
WAN connection type	RJ-45
Throughput	0.8 Gbit/s
Cabling technology	10/100/1000Base-T(X)
Networking standards	IEEE 802.1x
VPN tunnels quantity	20
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Ethernet LAN interface type	Gigabit Ethernet
USB port	No
Combo SFP ports quantity	1
Ethernet LAN (RJ-45) ports	8
Mobile network generation	Not supported
Security algorithms	IPSec
Routing protocols	RIP-1, RIP-2, RIPng
Antenna type	External
Antennas quantity	3
Product type	Tabletop router
Product color	Black, Grey
Country of origin	China
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	5 - 90 %
Operating relative humidity (H-H)	10 - 85 %
Top Wi-Fi standard	Wi-Fi 5 (802.11ac)
WLAN data transfer rate (max)	- Mbit/s
Power source type	DC
Quantity per pack	1 pc(s)
Harmonized System (HS) code	85176990
Package depth	378.968 mm
Package width	272.034 mm
Package height	130.048 mm
Package weight	1451.5 g

Weight and Dimensions

Depth	279.4 mm
Width	170 mm
Height	38.5 mm
Weight	1359.93 g