Cisco SF350-48P Administration Guide

Security
Password Strength
Cisco 350, 350X and 550X Series Managed Switches, Firmware Release 2.4, ver 0.4 333
17
• Incoming Authentication-Requests from Unknown Addresses—Number of
incoming authentication requests from unknown addresses.
• Incoming Duplicate Accounting-Requests—Number of incoming duplicate account
requests.
• Accounting-Responses Sent—Number of accounting responses sent.
• Incoming Malformed Accounting-Requests—Number of malformed accounting
requests.
• Incoming Accounting-Requests with Bad Authenticator—Number of incoming
accounting requests with bad authenticator.
• Incoming Accounting Packets with Other Mistakes—Number of incoming
accounting packets with other mistakes.
• Incoming Not Recorded Accounting-Requests—Number of incoming accounting
requests not recorded.
• Incoming Accounting Packets of Unknown Type—Number of incoming accounting
packets of unknown type.
To clear the counters, click Clear Counters.
To refresh the counters, click Refresh.
Password Strength
The default username/password is cisco/cisco. The first time that you log in with the default
username and password, you are required to enter a new password. Password complexity is
enabled by default. If the password that you choose is not complex enough (Password
Complexity Settings are enabled in the Password Strength page), you are prompted to create
another password.
See User Accounts on how to create a user account.
Since passwords are used to authenticate users accessing the device, simple passwords are
potential security hazards. Therefore, password complexity requirements are enforced by
default and may be configured as necessary.

Cisco SF350-48P Specifications

General

Brand	Cisco
Model	SF350-48P
Category	Switch
Language	English