Cisco SG100D-08 Unmanaged Gigabit Switch Quick Start Guide 4
Back Panel Ports
The Ethernet ports and the power port are located on the back panel of
the unmanaged switch.
Ethernet Port—The unmanaged switch is equipped with auto-sensing,
Ethernet (802.3) ports used for wired network communications. Auto-
sensing technology enables each port to automatically detect the speed
and duplex settings of the device connected to it, and adjust its speed and
duplex settings to match the settings of the connected device. Each
Ethernet port accepts an RJ-45 connector.
Side Panels
The security slot is where you can attach a Kensington lock to protect the
switch from theft and is located on the right side of the unmanaged switch.
The power switch is located on the left side of the unmanaged switch.
To Next Page
Loading...
Need help?
General
