Cisco SG350XG-24F Administration Guide

Dashboard
PoE Utilization
27 Cisco Sx350, SG350X, SG350XG, Sx550X & SG550XG Series Managed Switches, Firmware Release 2.2.5.x
2
PoE Utilization
This module displays a graphic representation of the PoE utilization status., as shown below:
For a standalone unit, this module displays a gauge with a dial of values from 0-100. The
section of the dial from the traps threshold to 100 is red. In the middle of the gauge, the actual
PoE utilization value is shown in watts.
Each bar represents the PoE utilization percentage value of the device on a scale of 0 to 100. If
the PoE utilization is higher than the traps threshold, the bar is red. Otherwise the bar is green.
When hovering on a bar, a tooltip appears showing the actual PoE utilization of the unit in
watts.
Latest Logs
This module contains information about the five latest events logged by the system as
SYSLOGs, as shown below:

Cisco SG350XG-24F Specifications

General

Brand	Cisco
Model	SG350XG-24F
Category	Switch
Language	English