Smart Network Application (SNA)
Operations
Cisco Sx350, SG350X, SG350XG, Sx550X & SG550XG Series Managed Switches, Firmware Release 2.2.5.x 667
29
The data is shown as a number of octets (0 - highest sample in selected interfaces/time period)
with number and frequency of samples depending on the displayed time scale:
• Last five minutes—20 samples (one every 15 seconds).
• Last hour—60 samples (one every minute)
• Last day—24 samples (one every hour)
• Last week—7 samples (one every day)
• Last 3 months—12 samples (one every week)
Traffic Graph (Packets)
This graph is an interface-level graph that shows the total traffic on an interface in packets
over time. The graph is available for all interfaces (ports or LAGs) of devices with full SNA
support.
The data in both versions is shown as a number of packets (0 being the highest value in
sampled range) with number and frequency of samples depending on the displayed time scale:
• Last five minutes—20 samples (one every 15 seconds).
• Last hour—60 samples (one every minute)
• Last day—24 samples (one every hour)
• Last week—7 samples (one every day)
• Last 3 months—12 samples (one every week)
Operations
The topology view displays the elements and their connections in the network. Operations can
be performed on elements displayed in the topology view.
When you select an element in the topology, it is possible to perform the following actions:
• View information regarding the element—See Explorers
• Configure an element—See Services
• Add a device or switch to the Topology View—See Manually Adding a Device or
Switch to the Topology View
To Next Page
Loading...
Need help?
General
