Cisco SPA112 Setup & User Guide

Copyright © 2005-2012 Jaguar Telecom Version 1.8 Page 7 of 8
Slow Blinking ( 0.5s ON, 0.5s OFF )
• System Initialisation
• Looking for DHCP
long, short, short, off for 2 seconds
• No Ethernet link detected
Very Fast Blinking , for 30 seconds
• The unit is being upgraded, NO NOT DISCONNECT OP UNPLUG the unit until
it has finished.
Internet Light
Off
• No Ethernet link detected
Solid light
• Ethernet link detected
Random flashing
• Network has data flowing
Phone Light
Off
• Phone line is not configured or is not registering properly with the Jaguar Telecom
Service
Solid light
• Phone line is registering properly with the Jaguar Telecom Service, and is ready
for use
Show flashing
• Phone is in use or off hook.
4.2 No Audio
If you cannot hear audio during a call please check the firewall settings of your
router are correct.

Cisco SPA112 Specifications

General

Supported network protocols	IPv4, IPv6, ARP, DNS, SRV, DHCP, PPPoE, ICMP, TCP, UDP, RTP, RTCP, SNTP
DHCP client	Yes
VPN support	802.1p
Security algorithms	SSL/TLS
Authentication method	SIP
Modem (RJ-11) ports	2
Ethernet LAN (RJ-45) ports	1
Voice codecs	G.711, G.726, G.729
Certification	FCC, CE, ICES, A-Tick, RoHS, UL
Fax compatibility	T.38
Output current	2 A
Output voltage	5 V
AC input voltage	100-240 V
AC input frequency	50 - 60 Hz
Storage temperature (T-T)	-25 - 70 °C
Operating temperature (T-T)	0 - 45 °C
Operating relative humidity (H-H)	10 - 90 %

Weight and Dimensions

Width	101 mm
Height	28 mm
Weight	153 g